WoodLtd® Studio Thailand
LIMITED WARRANTY FOR TEAK DOORS WINDOWS & ALLOY GATES


WoodLtd® Studio (Thailand) warrants, subject to the conditions and restrictions contained below, that each stile and rail manufactured and sold by WoodLtd® Studio shall: 1) comply with WDMA Industry Standard I.S. 6-91 Series, as periodically amended, 2) be free from defects in materials and workmanship from the time of manufacture until the time specified below:

Product is available unfinished, pre-finished or primed. Pre-hanging is available. Warranty Period: 2 years.

All visible defects or mistakes in shipment must be reported to WoodLtd® Studio before the product is installed or trimmed, otherwise product shall be deemed correct and/or acceptable.

Should WoodLtd® Studio stile and rail fail to conform to this written warranty, WoodLtd® Studio will, at its option repair or replace the door or/and window. EXCEPT AS OTHERWISE EXPRESSLY PROVIDED HEREIN, WOODLTD® STUDIO SHALL NOT PAY FOR THE COST OF LABOR, INSTALLATION, FINISHING OR SHIPMENT OF THE REPLACEMENT OF ORIGINAL DOOR/WINDOW OR FOR ANY OTHER COST RELATING TO THE REPLACEMENT OF THE DOOR/WINDOW, ALL OF WHICH SHALL BE THE SOLE RESPONSIBILITY OF THE PERSON MAKING THE WARRANTY CLAIM.

THE FOLLOWING SHALL NOT BE CONSIDERED DEFECTS IN MATERIAL OR WORKMANSHIP AND ARE NOT COVERED BY THIS LIMITED WARRANTY:

  1. Warp for any door/window wider than 42" or taller than 96";

  2. Warp for any nominal 1-3/4" thick by 42" wide by 96" high or smaller door/window, not exceeding 1/4" in the plane of the door/window itself;

  3. Bow or nonalignment in the frame or jamb in which the door/window is hung if such is purchased from WoodLtd® Studio un-machined and not prehung;

  4. Variations or unsatisfactory results in gloss level, texture or appearance resulting from the field application of paint or any other finishing material;

  5. Natural variations in the color or texture of the wood;

  6. Damage caused by others or by any cause beyond the control of WoodLtd® Studio, including but not limited to damage caused by misuse, abuse, accident, mishandling and by extreme weather conditions, severe temperatures variations, direct sun light, snow or rain, great humidity changes, fire, flood, earthquake, storm, tornado or other acts of nature;

  7. 1-1/8" thick doors/windows which are wider than 3'-0" or higher than 7'-0"

  8. 1-3/8" thick doors/windows which are wider than 3'-0" or higher than 7'-0"

  9. 1-3/4" thick doors/windows which are wider than 3'-6" or higher than 8'-0"

  10. 2-1/4" and thicker doors/windows which are wider than 3'-6" or higher than 10'-0"

  11. Doors/windows that are improperly hung or do not swing freely

  12. Doors/windows with panels over 27" in width

  13. Hardwood doors/windows, except for Genuine Teak doors, used in exterior applications

  14. Exterior doors/windows installed in locations that allow them to receive, either direct or indirect moisture wetting

  15. Doors/windows with mitered rim panels used in exterior applications

"Misuse" of a door/window includes, but is not limited to, using a door/window on part of a building without providing adequate overhang or an appropriate finish color. Adequate overhang depends on the typical weather conditions of the area where the door/window is to be used, but typically means an overhang projecting a distance from the structure one half the elevation difference between the bottom of the door/window and the base of the overhang structure at the point which is farthest from the door/window. In order to reduce the chance of warping or checking, dark colored finishes should be avoided on all surfaces, especially on light colored wood species, or if the door/window is exposed to direct sunlight;

  1. The discoloration or rusting of decorative metal accent options, (Grilles, Clavos, Straps, etc.)

  2. Knot placement, quantity, or size found on knotty alder;

  3. Raised (hair like) grain found on wire brushed surface.

  4. Damage due to trimming more than 1/2" from the top or 1-1/2" from the bottom;

  5. Damage caused by failure to comply with the Care, Handling or Finishing; to include but not limited to damage caused by failing to seal all six (6) sides of the door.

  6. Failure to perform normal homeowner's maintenance, including maintaining the finish (factory finish or non-factory finish);

  7. Product failure due to improper or incorrect installation;

  8. Attempts to repair WoodLtd® Studio products other than by WoodLtd® Studio;

  9. Hardwood surface checks that are less than 1/32" in width and/or 2" in length; Knotty Alder surface checks that are less than 1/8" in width and/or 5" in length;

  10. Panel movement (shrinkage) of 1/4" or less. Temperature and humidity may cause the wood panels in your door/window to shrink, leaving an unstained line along the panel edge. The panels in your door have been designed to "float."

  11. Damage caused by extreme temperature buildup where a storm door is utilized. Storm doors must be vented to eliminate this temperature buildup;

  12. Slight expansion or contraction due to varying environmental conditions, such as temperature and humidity;

  13. If the claimed non-conformity is warp, WoodLtd® Studio may defer repairing or replacing the product for a period of up to twelve (12) months from the date of claim or the date when the product was installed, as it is not uncommon for a temporary warp condition to occur as the door adjust to local humidity and temperature conditions.

  14. Doors made in other wood than genuine Burmese Teak grade A

Claims under this Limited Warranty must be made in writing within the period of this warranty and prior to the beginning of any repair work. Claims should detail the date of purchase, the nature of the problem, and the name, address, telephone number and e-mail of the person making the warranty claim.

THIS LIMITED WARRANTY EXTENDS ONLY TO THE ORIGINAL PURCHASER OF PRODUCTS OR TO THE ORIGINAL PURCHASER OF THE STRUCTURE INTO WHICH SUCH PRODUCTS ARE INSTALLED.

LIMITATIONS AND EXCLUSIONS

THIS WARRANTY SETS FORTH WOODLTD® STUDIO MAXIMUM LIABILITY FOR ITS PRODUCTS. WOODLTD® STUDIO MAKES NO OTHER WARRANTY, EXPRESSED OR IMPLIED, INCLUDING IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, WITH THE RESPECT TO ITS PRODUCTS EXCEPT AS IT IS SET FORTH ABOVE. NO DISTRIBUTOR, DEALER OR REPRESENTATIVE HAS THE AUTHORITY TO CHANGE OR MODIFY THIS LIMITED WARRANTY. IN NO INSTANCE SHALL WOODLTD® STUDIO BE RESPONSIBLE FOR INDIRECT, CONSEQUENTIAL OR INCIDENTAL DAMAGES.

This warranty is effective for all products manufactured or sold by WoodLtd® Studio after January 1st, 2000. WoodLtd® Studio warranty covers repair or replacement only (the original door/window must be returned to us), not installation or freight. We assume no responsibility for site-work cost of pre-hanging, insurance, shipping, reinstalling and/or refinishing. Any implied warranty shall be limited in duration to the period of this warranty and to the remedies specified herein. We shall not be liable for any doors/windows repaired, returned or replaced without our prior written consent.

NOTE: WoodLtd® Studio reserves the right to make product improvement changes in specifications, materials and construction details. WoodLtd® Studio premier hardwoods vary in color and grain, which can affect the actual finish color. Variances in photography and printing may also cause finish colors show in this catalog to vary from actual finish.


http://www.woodltd.com/

Updated 05-Apr-2005

Copyright © WoodLtd 2005 Doors Windows Gates